Remote lock
You can lock your device remotely using a predefined text
message. You can also lock the memory card remotely.
Enable remote locking
1. Select
Menu
>
Settings
and
Phone
>
Phone mgmt.
>
Security
>
Phone and SIM card
>
Remote phone
locking
>
Enabled
.
2. Enter the text message content (5-20 characters), verify
it, and enter the lock code.
Lock your device remotely — Write the predefined text
message, and send it to your device. To unlock your device,
you need the lock code.
Your device
© 2011 Nokia. All rights reserved.
25
4. Make calls
Touch screen during calls
Your device has a proximity sensor. To extend battery life and
prevent accidental selections, the touch screen is disabled
automatically during calls, when you place the device next to
your ear.
Do not cover the proximity sensor, for
example, with protective film or tape.
Make a voice call
1. In the home screen, select to open the dialler, and
enter the phone number, including the area code. To
remove a number, select C.
For international calls, select * twice for the + character
(which replaces the international access code), and enter
the country code, area code (omit the leading zero if
necessary), and phone number.
2. To make the call, press the call key.
3. To end the call (or to cancel the call attempt), press the
end key.
Pressing the end key always ends a call, even if another
application is active.
Call a contact
1. Select
Menu
>
Contacts
.
2. Go to the desired name. Or, enter the first letters or
characters of the name in the search field, and go to the
name.
3. To call the contact, press the call key. If you have saved
several numbers for a contact, select the desired number
from the list, and press the call key.
End a call — Press the end key.
During a call
Mute or unmute the microphone — Select or .
Put an active voice call on hold — Select
or .
Activate the loudspeaker — Select . If you have attached
a compatible headset with Bluetooth connectivity, to route
the sound to the headset, select
Options
>
Activate BT
handsfree
.
Switch back to the handset — Select .
End a call — Select
.
Switch between active and held calls — Select
Options
>
Swap
.
Tip: To put an active call on hold, press the call key. To
activate the held call, press the call key again.
Send DTMF tone strings
1. Select
Options
>
Send DTMF
.